ZANKER KDI10003XB Bedienungsanleitung PDF herunterladen (Seite 3)

• If the supply cord is damaged, it must be replaced by the manufacturer, its

Authorised Service Centre or similarly qualified persons in order to avoid a

hazard.

• Put the cutlery in the cutlery basket with the sharp ends pointing down or

put them in the cutlery drawer in a horizontal position with the sharp edges

down.

• Do not leave the appliance with the open door unattended to avoid

stepping accidentally onto it.

• Before any maintenance operation, deactivate the appliance and

disconnect the mains plug from the socket.

• Do not use high pressure water sprays and/or steam to clean the

appliance.

• If the appliance has ventilation openings in the base, they must not be

covered e.g. by a carpet.

• The appliance is to be connected to the water mains using the new

supplied hose-sets. Old hose sets must not be reused.

Safety instructions

Installation

Warning! Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C.

• Follow the installation instruction supplied with the

appliance.

• Always take care when moving the appliance as it is

heavy. Always use safety gloves and enclosed

footwear.

• Make sure that the appliance is installed below and

adjacent to safe structures.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the parameters on the rating plate

are compatible with the electrical ratings of the

mains power supply.

• Always use a correctly installed shockproof socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains plug

and to the mains cable. Should the mains cable

need to be replaced, this must be carried out by our

Authorised Service Centre.

• Connect the mains plug to the mains socket only at

the end of the installation. Make sure that there is

access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• This appliance complies with the E.E.C. Directives.

• UK and Ireland only. This appliance is fitted with a

13 A mains plug. If it is necessary to change the

mains plug fuse, use only a 13 A ASTA (BS 1362)

fuse.

Water connection

• Do not cause damage to the water hoses.

• Before connection to new pipes, pipes not used for

a long time, where repair work has been carried out

or new devices fitted (water meters, etc.), let the

water flow until it is clean and clear.

• Ensure that there are no visible water leaks during

and after the first use of the appliance.

• The water inlet hose has a safety valve and a

sheath with an inner mains cable.

1 2 3 4 5 6 7 8 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

ZANKER KDI10003XB Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler ZANKER KDI10003XB