
Automatic Switch Off times
Heat setting
- - -
Stops after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to
decrease the heat setting. The display shows the heat
setting. Touch and at the same time to switch
off the cooking zone.
The automatic heat up function
The automatic heat up function adds more power to
the cooking zones and you can get a necessary heat
setting in a shorter time. The automatic heat up function
starts when you set a heat setting starting from
. A
cooking zone operates with the maximum power for
some time and than automatically switches back to the
heat setting you set.
If you set a higher heat setting during the automatic
heat up (for example from
to ), the automatic
heat up adjusts.
If there is still residual heat on the cooking zone (display
), the automatic heat up does not start.
The time of the automatic heat up changes for different
heat settings:
1
2
3
4
5
6
7
8
9
10
11
0
123456789
Switching the Power function on and off
The Power function makes more power available to the
induction cooking zones. The Power function is acti-
vated for 10 minutes at most. After that the induction
cooking zone automatically switches back to the high-
est heat setting. To switch on, touch
, comes
on. To switch off, touch
or .
Power management
The power management
divides the power between
two cooking zones in a pair
(see the figure). The power
function increases the
power to the maximum lev-
el for one cooking zone in
the pair and automatically
decreases in the second
cooking zone to a lower power level. The display for
the reduced zone alternates.
Using the Timer
Use the timer to set how long the cooking zone operates
for one cooking session.
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
•
Selection of the cooking zone: touch
again and
again until the indicator of a necessary cooking zone
comes on.
•
Starting or changing the timer: touch
or of
the timer to set the time (
00
-
99
minutes). When
the indicator of the cooking zone flashes slower, the
time counts down.
•
Stopping the timer: select the cooking zone with
and touch to switch off the timer. The re-
maining time counts backwards to
00
. The indi-
cator of the cooking zone goes out.
7
Kommentare zu diesen Handbüchern