ZANKER ZKF680ITXB Bedienungsanleitung PDF herunterladen (Seite 25)

Care and cleaning

Warning! Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have no

effect on how the hob operates.

• Use a special cleaner applicable for the surface of

the hob.

Stainless steel

• Wash stainless steel parts with water, and then dry

them with a soft cloth.

• To remove burn food, fat and stubborn stains, let

them soak for a few minutes in a small amount of

mild detergent before cleaning.

• Use cleaning products designed specifically for

cleaning stainless steel in order to protect the steel

surfaces.

• Do not use cleaning products containing corrosive

chemicals such as chlorides, do not clean the

surface with disinfectants, stain or rust removers

and immersion cleaners.

Pan supports

The pan supports are not resistant to

washing in a dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily clean the hob.

Be very careful when you replace

the pan supports to prevent the hob

top from damage.

2. The enamel coating occasionally can have rough

edges, so be careful when you wash the pan

supports by hand and dry them. If necessary,

remove stubborn stains with a paste cleaner.

3. After you clean the pan supports, make sure that

they are in correct positions.

4. For the burner to operate correctly, make sure that

the arms of the pan supports are aligned with the

centre of the burner.

Cleaning the hob

• Remove immediately: melted plastic, plastic foil,

sugar and food with sugar. If not, the dirt can cause

damage to the hob. Take care to avoid burns.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny metallic

discoloration. Clean the hob with a moist cloth and

non-abrasive detergent. After cleaning, wipe the hob

dry with a soft cloth.

• To clean the enamelled parts, cap and crown, wash

them with warm soapy water and dry them carefully

before you put them back on.

Cleaning the spark plug

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these components

well clean to prevent difficult lighting and check that the

burner crown holes are not obstructed.

Periodic maintenance

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas supply

pipe and the pressure adjuster, if fitted.

Troubleshooting

Warning! Refer to Safety chapters.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

ZANKER ZKF680ITXB Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder ZANKER ZKF680ITXB