ZANKER ZKS5550I Bedienungsanleitung

Geschirrspüler ZKS 5550 I DishwasherBedienungsanleitungInstruction book

33Use of detergent Only use detergents specifically designed for use in dishwashers.If using powder detergents proceed as follows:1. Open the dispense

34To save energyPlace dishes in the machine immediately after everymeal and wait until the dishwasher is full beforewashing.If necessary run the Rinse

35ProgrammeDegree of soilandtype of loadStartingposition of theprogrammerRequiredpushbuttonsCycle descriptionPRO36enWashing programmesNormal 65°Cwithp

361. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning").2. Check that there is rinse aid and s

37Internal cleaningEnsure that the seals around the door, the detergentand rinse aid dispensers are cleaned regularly with adamp cloth.We recommend ev

38External cleaningClean the external surfaces of the machine andcontrol panel with a damp soft cloth. If necessary useonly neutral detergents. Never

39Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer.Before contacting yo

40If after all these checks, the problem persists, contactyour local Service Force Centre, quoting the modeland serial number. This information can be

41Hints for test centresBefore starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinseaid dispe

42Remove all packaging before positioning themachine.If possible, position the machine next to a water tapand a drain.Water supply connections This di

25For the userImportant safety information 26Description of the appliance 27The control panel 27Before use 28Setting the water softener 28Rinse aid 30

43Water outlet hose connectionThe end of the drain hose can be connected in thefollowing ways:1. To the sink outlet siphon, securing it if necessary w

44This dishwasher is designed to be fitted under akitchen counter or worksurface.It is essential that the recess dimensions indicated inthe diagram ar

45The furniture doorThe door on this appliance is designed for the overlayof a panel having the following dimensions:Width 446 mmHeight 644 - 714 mm m

46Fitting the vapour protectionScrew the vapour protecting strip onto the front part ofthe worktop using four 3,5 x 16 screws.Fitting the sealing stri

47Kitchen plinth adjustmentTo allow correct opening of the door it is sometimesnecessary to cut the kitchen plinth. Refer to thecutting table.Accordin

ende152983 02/0

26Installation● This appliance is heavy. Care should be taken when moving it.● It is dangerous to alter the specifications or attempt to modify this p

271. Water hardness adjustment2. Upper basket stop3. Salt container4. Detergent dispenser5. Rinse aid dispenser6. Control panel7. Filters8. Lower spra

28Before using your dishwasher for the first time:1. Ensure that the electrical and water connections comply with the installation instructions2. Remo

29Filling with saltOnly use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in a dishwashe

30Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak freedrying. The dispenser, which is

31Loading your applianceBefore placing dishes in the machine, remove anyscraps of food, to avoid clogging the filters andconsequently reducing the per

32The upper basket The upper basket is designed for plates (dessertplates, saucers, dinner plates of up to 24 cm indiameter), salad bowls, cups and gl